Perform the following instructions to check your monitor information. Mouse right-click on the Desktop and go to Properties (or Registration Information) ->Setting->Advanced ->Monitor. Check your monitor name under the Monitor tab. If you see your monitor is "Plug & Play Monitor", this means that your monitor has been correctly installed. In this case, you do not have to set up your monitor separately or install the monitor driver. If you see "Primary Monitor" or "Standard Monitor" as a monitor name, this means that your computer has not perceived optimum value of your monitor. Therefore, you have to download the appropriate driver for installation. The driver is available from Hyundai ImageQuest official website. [ NOTE ]

The driver is intended to notify a computer of information on a monitor. The driver will register optimum/variable frequency and resolution of a monitor with a computer. Since all drivers of Hyundai ImageQuest has been registered with Windows operating systems, you will see "Plug & Play Monitor". ¡Ø In case of Windows XP Microsoft requires all peripheral device manufacturers to pay charges for working with Windows XP version. Any old or no longer produced products have not been registered with Microsoft. Your monitor will be automatically set to Windows OS when installing the driver. So, you can proceed with the installation of the driver, ignoring any warning message saying, "This display driver is not compatible". Or you may see a monitor name (model name) on other Windows versions, such as WIN95 and WIN98. However, if you should come across "Primary Monitor", this means that your driver has not been installed correctly. In this case, delete the monitor item from the Device Manager and reinstall the driver. Your monitor will be registered as a "Plug & Play Monitor".

This may happen when no Input signal (Frequency) is sent to the monitor. In case such problem happens even when a computer is on, it is highly likely that your computer has a defective graphic card installed in it. We recommend that you swapped out your monitor, computer or graphic card to check which part has a problem. In many cases, this may happen due to a defective graphic card, not defective monitor.

Hyundai ImageQuest manufactures a TCO approved and labeled products. The TCO, which has been established in Sweden, has required the related industry to manufacture all IT equipments on a user-friendly basis since 1980. This system has been applied to any monitor products from 1992. Now, IT industry worldwide requests a label authorization to TCO. The TCO has developed this system in cooperation with scientists, experts and professional users in all fields including IT manufacturers. [ NOTE ] TCO'03 Display Requirements Ergonomics - To provide better image quality based on human engineering in order to improve a user's task environment, prevent eyesight problems andreduce a feeling of fatigue To do this, the key factors are brightness, contrast, resolution, reflectivity, color control and stable image, etc. Energy - After a certain period of inactivity, the monitor should go into the power saving mode. Emissions - To regulate the radio waves and noise emission, etc. Ecology - The manufacturers should manufacture their products that can be recycled. The manufacturers should establish an authorized environment management system like EMAS or ISO 14000.

Hyundai ImageQuest does not provide the Linux driver separately. However, you can use the Linux by performing the following steps. 1). Search XF86Config file and modify the following information. 2).Section " Monitor " Identifier ".........." VendorName ".........." DisplaySize 1024 768 <- This is recommended resolution (1024 * 768 ). HorizSync 30.0 - 70.0 <- Input the horizontal frequency range of your monitor (30 ~70KHz ). VertRefresh 50.0 - 100.0 <- Input the vertical frequency range of your monitor (50 ~100Hz). Option "dpms" EndSection 3). Save the XF86Config file and reboot your computer.

In many cases, the streak effect happens due to incorrect settings of resolution or frequency, not due to a monitor problem. Recommended specifications vary according to display models. Please configure optimum resolution and frequency referring to your User's Manual. If such problem persists, please contact Service Center stating your Windows version, graphic card, resolution and frequency. (Screen shaking may be caused by other factors such as unstable voltage or other electronic appliances.)

Black color changes to green color. A smearing effect may happen on any defective monitor. In many cases, such symptom may be resolved by making a slight adjustment. (Slightly different input values may cause such effect.) First, let me explain how to recover the normal state of your display. (You must set your display with care. If anything is not clear to you, ensure to contact our Service Center for help.) 1. Turn your monitor off. 2. Turn your monitor on by pressing the Power button while pressing your monitor Menu ke 3. You will see FACTORY MODE in the middle of the screen. 4. Select INITIAL item from the Menu. 5. The smearing effect will disappear.

The refresh rate is the amount of times a display's image is repainted or refreshed per second. The refresh rate is expressed in hertz so a refresh rate of 75 means the image is refreshed 75 times in a second. In other words, it takes 1/75 second for the display to change the entire image to another image. The higher the refresh rate, the better. However, if a refresh rate is 60 or more, you cannot feel the difference. Most of Hyundai ImageQuest LCD models have a refresh rate of 60Hz that is an optimum refresh rate.

The error message, Video Mode Not Support means that your monitor cannot represent the display signal sent from the video card installed in your computer. For example, the maximum resolution of a 15" LCD is at 1024*768. But the resolution of the monitor is set to 1280*1024, the screen gets black and "Video Mode Not Support " message appears. In this case, shut down your computer and reboot in the Safe Mode by pressing F8 key. (How to boot in Safe Mode may vary according to Windows versions.) Go to Display Settings in Safe Mode to set your monitor to the optimum resolution. When you boot your computer again, a normal screen will come back.

The LCD monitor screen is coated with special thin-film. Just wipe off the dusts or dirt on the screen with a moistened cloth. Never use chemicals such as wax cleaners. Or strong cleaners which can cause the surface to yellow and become brittle. Make sure not to give the screen surface a firm press while cleaning, which may result in the smudges on the screen surface. LCD screens are softer than CRT glass screens, so they require some extra tender loving care.

The broadcasting analog signals vary depending on NTSC , PAL and SECAM regions. < NTSC > PAL or SECAM tuner products are not available in the NTSC regions. Any connecters for broadcasting signal reception do not work well in the NTSC regions. In this case, you need to set the channels with a NTSC tuner product. < PAL , SECAM > You may use a same tuner to receive PAL and SECAM broadcasting signals but no NTSC products are available. You need to set the channels with PAL or SECAM tuner product.

Every user has the different preferred brightness. You need to find the brightness that is best suitable for you. The high brightness may cause eye fatigue in a dark environment. To lessen eye fatigue, add light source to your room and adjust the optimum brightness of your LCD monitor.

In general, CRT monitors may make a humming noise (capacitor noise). This effect makes no difference to a monitor's performance. Inappropriate settings of resolution or frequency may cause internal parts to make noises. In this case, consult the user's manual to set the appropriate standard resolution and frequency.

If you place or have placed any magnetic stuff (such as electric line, magnet, speaker or other electronic appliances) near your monitor, this may cause ghost effects on your CRT monitor. To eliminate such symptom, press the Menu key of your monitor to select and activate DEGAUSSIG item from the Menu. (Please make sure not to place any magnetic equipment around your monitor.) If such symptom persists after performing the above steps, your cathode-ray tube may have got any external shock. Please contact our Service Center.

Pressing the Recall button of menu keys on the bottom of your monitor will recover a normal screen. If this does not work, perform the following steps. Choose Menu Key -> Position Menu -> H-Position (Left, Right) and V-Position (Up, Down).

Choose Menu key ¡æ i Icon Select ¡æ Slect key put and reboot your computer.

The recommended resolution of the CRT Monitor is 1024*768@85HZ. Turn off your monitor and turn your monitor again while pressing the Menu key to pop up the Factory Menu window. Select the AB icon (ABL value adjustment icon) in the second line and adjust ABL values. And the turn off your monitor and turn it on back to save the newly adjusted values. ! Caution It is impossible to recover the original values. When adjusting the ABL values, ensure to make a note of the factory values. Do not try to change other values than ABL.

PDP presents an extraordinary contrast ratio and brightness level based on plasma effect using high-voltage. That's why any PDP generates heat. There are some customers who are worried about a defect with their product. But this is a common phenomenon of all PDP products. The PDP industry installed a noisy fan in the previous models to prevent the heat generation. Now, free-noise PDPs with no fan are on the market.